Mold on the walls - how to get rid?

Nobody is immune from the appearance of mold, as it is preceded by a lot of factors. But if the fungus appeared in the house, then it is urgent to sound an alarm, as it can become the causative agent of dangerous diseases. What is harmful to mold on the walls? Here you can identify several factors:

In addition to the negative effect of the fungus on the health of those living in the apartment, the walls and unprotected wooden structures are badly damaged. The mold can settle on a tree and turn it into chippies for a short time. In addition, clothing in the apartment quickly absorbs the smell of dampness and becomes unsuitable for wearing.

How to deal with mold on the walls?

The key to rapid removal of mold is to eliminate the factors of its appearance, namely:

  1. Freezing of walls . Plaque was formed around the edges and at the corners of the walls. This indicates that your walls freeze. In this case, it is necessary to dry the darkened corners and check the fixing of the plaster.
  2. Moisture coming from the floor . In the place of joining the wall with the floor there are characteristic streaks. In this case, it is desirable to order an examination of the state of insulation of walls. If a damage to the wall is detected, it will be necessary to repair it.
  3. Water supply . The walls adjacent to the bathroom are covered with mildew or moisture appears along the passage of the pipes. If dehumidification is not performed on time, then repair can not be avoided.
  4. Poor ventilation of the kitchen / bathroom . In these rooms there is a high humidity, which causes the development of the fungus. Install a modern air-conditioning system or pay attention to the private airing of each room.

After eliminating the causes of mold, you can go directly to the treatment of walls. So, how to get rid of mold on the walls? First you need to check the layer of plaster on which the fungus is located on the grip with the wall. To do this, it is enough to knock on the surface with a hammer and listen to the sounding sounds. If you hear a muffled sound, it means that the plaster has fallen into disrepair and separated from the wall, it needs to be changed.

With the correct adhesion of the plaster, it is possible to pass to the cleaning of the wall with an antiseptic primer. This drug performs several functions: it relieves mold and prevents its occurrence in the future. Before applying the primer it is advisable to clean the plastered wall to a clean layer, possibly even to reach the brick. Apply it on a clean, dry surface with an indentation of 1 meter to ensure that the spores of the fungus are removed. To apply, use a conventional paint brush. After the primer has dried, you can paste over the wall with wallpaper or paint with paint.

To treat walls from mold, you can also use bleach (a mixture of 10 parts of water and 1 part of bleach), vinegar, ammonia and a solution of hydrogen peroxide. But remember that these funds will help only with the incipient mold, which has not yet managed to form a mycelium and penetrate the wall.

Tips for fighting mold

There are several recommendations that will help you in the struggle for the cleanliness of the walls in the house: