Leashes for a cat are necessary for us, when we together with the pet come across a move or if you prefer not to let go of the pet during your walk away from yourself. Of course, it is quite difficult to accustom a cat or a cat to such a kind of violence over their desire for independence, but sometimes it can not do without it.
How to sew a leash for a cat with your own hands?
For a cat it will be enough to make a self-made leash of the simplest sample. From the materials we need 1.5 meters of slings and a carbine.
An important rule when making a leash for a cat with your own hands is that the paddock should be comfortable, accordingly, the length of the leash should be comfortable for you and for the animal. If you have a lot of growth, then you need a leash more authentic. The cat must move freely and do not feel constant tension.
We thread the carbine in one end of the line, winding it about 4 cm, bend and tie on the machine: we make 2 parallel seams: along the edge of the folded slings, next to the carbine and still crosswise between the two seams for reliability. Cropped edge of the lanyard cauterized with a match or lighter, so that it does not pour.
| | | |
At the other end of the line we make a loop for the hand. Its width depends on the width and size of your palm. We fix this loop on the typewriter in the same way as we did for the carbine: two machine lines parallel to each other and crosswise for strength.
An alternative to machine sewing can be the use of rivets (cholnenenes). But in this case you need a special machine and a punch, and there are not all of them.
| | | |
To the edges of the lines do not cut your hands, you can bend them along the entire length of the leash and stitch on the typewriter . Then a walk with a cat on this leash will be a pleasant experience for you. And the leash itself will not be so wide and tidier.
| | | |
