Indoor decorative fireplace , made by own hands - a budgetary variant of furnish of space. You will need a small amount of drywall, profiles and screws. All this could remain with you after the erection of plasterboard walls or walls. So why not use the material in a new direction?
Decorative portal for the fireplace with your own hands: erection of the frame
Two types of profiles will be used for making a false fireplace : narrow UD and wider CDs. They will create a certain groove.
The first will be attached to the wall, the CD will enter UD this way:
Before proceeding with the installation, make a sketch of the structure.
- On the wall and floor make a markup. To the floor we fix the elements with the help of a screwdriver and self-tapping screws.
- For fastening to the walls you will need to tighten the profile, untwist and then fix it using dowels. Thus, it is convenient to obtain the required holes.
- The next step is marking on plasterboard: cut out the elements with a special knife and saw.
- Prepared pieces of plasterboard are attached to the profiles from the back side.
- The remaining profiles must be attached to the wall.
- Wide profile so cut that it went into the embedded parts. In this case, you need 9 pieces. Accessories are attached to the frame by screws.
We make a decorative fireplace with our own hands: sewing and finishing the frame
- "Skeleton" is ready, now it is necessary to sew it with plasterboard.
- The lower part is ready. You can start decorating it. To do this, you need a wide plinth of expanded polystyrene. Make a trim. To fix, you need a special adhesive or putty.
- While the finish dries, proceed to the installation of the "pipe". The principle of operation is the same: profiles are mounted to the load-bearing structure, gypsum board is on them.
- On the edges with the help of a construction stapler a perforated profile is put. Then a layer of putty will follow.
- To design a false fireplace in the art-deco style, use special pads, which are then covered with a layer of putty. Elements are planted on glue and hardware.
The main work is done, you just have to cover the structure with a layer of paint.
Corner decorative fireplace with its own hands from plasterboard is done on the same principle, only the shape of the frame will change.