Summer has come, which means that it's time to pump the press, ass and legs. Do not forget about the stylish swimsuit, which will emphasize the dignity of your figure and turn you into a real queen of the beach. Do not need to spend money on a fashionable bikini. It can be sewn by yourself.
1. Take an ordinary bathing bodice and carefully cut out small triangles.
For this purpose, a marker that is easily erased, slowly draw two triangles. Cut them with sharp scissors, and treat the edges with transparent nail polish. Voilà! You have a stylish bodice, and the money is intact.
2. Buy a fringe of beautiful color and sew it to the old bodice.
Choose the fringe of a harmonious color scheme. In manual or on the machine, sew it to the top of the bodice.
3. The bustier turns into a stylish swimsuit with fringe and ethnic patterns.
Is not this beauty? You can easily create it yourself with indelible markers and your imagination. So, on a separate sheet draw a pattern, which will then be transferred to your swimsuit. Have thought up? Now take the white bodice and panties. On them we sketch the future print. Armed with colored markers and forward, we decorate the swimsuit. Finishing stroke: sew the fringe of the color you like to the upper part of the bra.
4. To create such a bikini you need to take a needle and thread.
It is necessary:
- sewing machine;
- pattern;
- fabric 1-1.2 m (cotton, silk);
- elastic (width 1-3 cm);
- scissors;
- Needle, remnant and everything you need for sewing.
Create the bottom:
- For tailoring the swimming trunks from the fabric, we cut out the necessary details. Do not forget to leave the allowance on the seams (about 1.5 cm).
- We sew each part together.
- Each edge is twisted twice, pinned with pins and we spread it on the typewriter.
- Next, a wide zigzag should be attached to the elastic band. Do not forget that we take it according to our standards. For the transfer and the back, the total length should be divided in half.
Create top:
- We also cut out the necessary parts from the fabric (D3 - 2 pcs., D4-D7 - 1 pc.).
- From above and from below D3, it is necessary to sew the edges, to which we garnish a wide zigzag elastic (stretched).
- Sew the edges of the bodice.
- And the detail of D4 should be folded in half and stitched from two sides, through the third we turn the part to the front side.
- For billet preparation, iron with an iron, tucking the edges off the third side and sewing with a hidden seam.
- D6 fold in half, stitch from both sides and turn to the front side.
- Put together the bodice and the bow.
- With the help of a couple of stitches, the four edges of the bow are fastened to the bodice.
- Take the details of D5 and D7 and, by analogy, make a small bow for swimming trunks, which for four corners sew on behind the panties.
And here is another version of a similar no less interesting swimsuit.
Here you need to take an elastic fabric of any color. Cut it according to your standards. To the front of such a bodice of a lace is to sew a stylish striped bow.
5. Frozen old closed swimsuit? Turn it into a sexy trikini.
It is necessary:
- indoor swimsuit;
- scissors;
- a piece of chalk;
- needle and thread;
- a gold ring (you can buy in the hardware store);
- gold necklace as a supplement.
Instruction:
1. Swimsuit should be pulled on a box or stool. Note by chalk where exactly you want to make the cuts.
2. Carefully cut out.
3. In the lower part of the swimsuit we pass a golden ring. Stitch the fabric around it. Thus, it will not move with you. The same is done with the top of the leotard.
6. Stunning monokini
To create it you need:
- separate swimsuit of the same color;
- scissors and pins;
- needle or thread sewing machine;
- a shred of elastic fabric of the same color with the chosen swimsuit (it is best to take a bathing thong from the same set).
Instruction:
1. So, the bodice of the swimsuit between the cups is cut in half. Thongs are also cut.
2. The latter from above and from below sew to the bodice and the swimming trunks.
7. A gentle bikini.
There is no need to spend a lot of time on remaking the swimsuit. It is enough to take a bodice and a thin strip of cloth of the same color. Tie them a bustier and get a completely different bathing suit.
8. Create a brand bikini like the brand Chloe.
We take the old separate swimsuit. To the bodice and panties we are sewing such a wavy ruffle, which we previously create ourselves. To do this, we take an elastic fabric of the same color with a bikini. Cut out the waves. The edges are treated with a clear varnish.
9. Brand new bikini from an old T-shirt.
It is necessary:
- 1 large size T-shirt;
- scissors, thread with a needle, chalk;
- bikini, which suits you in size.
Sew the top:
- Put the T-shirt on a flat surface. Attach the bodice's bodice (pins with pins to the T-shirt). With this pattern cut the top part of the leotard, remember to leave 1.5 cm for the allowance.
- The bottom of the T-shirt will become the straps of the bodice (see figure).
Sew the bottom:
- Sweats in the expanded form we put to a T-short. Cut out, not forgetting the allowance for seams (1.5 cm).
- As with the bodice, the lower part of the T-shirt will become straps for swimming trunks.
10. Leggings turn into an elegant swimsuit.
11. Use the paint and create a swimsuit with the effect of the ombre.
It is necessary:
- dyes for fabric (choose a harmonious color scheme);
- hand protection gloves;
- paper towels;
- newspapers or oilcloth to protect the work surface;
- a bottle with a dispenser.
Instruction:
- Swimsuit spread on a flat surface.
- Pour the dyes into the bottles.
- In small lines one after another we apply the paint.
- We are waiting for the layers to start moving one into one.
- Squeeze the swimsuit and let it dry (6-8 hours).
12. Diversify swimming trunks.
In addition, these picked up briefs visually increase the buttocks. To create a similar effect from the wrong side with a needle and thread, we collect the fabric the way you like.
13. We cross the triangular bodice in a twist-top.
So, we cut the swimsuit where the top of our triangles connects to the straps. Then, let's say, the tops of triangular cups are sewn together.
Or you can create a bodice that will be tied up in an original way:
- We take the top with triangular cups.
- We unfold the last "vertices" to each other. That is, straps that are tied on the back now on the neck and vice versa.
14. Does the leotard look boring? Sew three strings instead of one.
It is necessary:
- bodice;
- elastic band (width 1 cm);
- Scissors, a needle with a thread or a sewing machine.
Instruction:
- Decide how long the elastic band should be (it all depends on your measurements).
- You need to cut three strips of the same length.
- Gently sew them to the bodice.
15. Women's floral swimsuit
Do you know how to crochet? Excellent! Then to start, create a few bright colors and a couple of green leaves. Take a light one-color swimsuit and sew to it previously created decor.
16. Bikini turns into an indoor swimsuit.
To create this beauty you need a separate swimsuit and elastic fabric (its length depends on your measurements). We put it on the bodice and the swimming trunks. The lower part, connecting the fabric with swimming trunks, can be decorated with a small frill.
17. Magic reincarnation grandmother's swimsuit in a stylish little thing.
18. Bring something new to the old swimsuit, just sewing to him a contrasting color strap.
It is necessary:
- bikini strapless;
- beautiful elastic bands (width 1.5 cm);
- pins;
- centimeter;
- scissors;
- sewing machine (or needle and thread).
Instruction:
Sewing straps. We cut the strap between the cups and sew a new one in its place. The same is done with the string from the back.
19. Add some lace.
Take the usual bikini and a couple of lace ribbons (choose colors at your discretion). Attach them to a bathing suit with a sewing machine or a needle with a thread.
20. We sew a swimsuit for pregnant women.
It is necessary:
- pins;
- elastic fabric of the same color as the swimsuit (about 1 m long);
- threads, needles;
- scissors;
- sewing machine;
- material for lining (about 1 m);
- centimeter.
Sew the bottom:
- An example is the panties from the old swimsuit. Attach them to the elastic fabric. Cut out the details.
- So make a lining (it should be a little less than a panty).
- Pin the lining to the main part.
- Turn and process the edges. Close the side seams.
Sew the top:
- Measure the chest girth, and the resulting value should be taken away from 5-10 cm (it all depends on the elasticity of your material).
- Decide on the width of the top.
- Open the elastic fabric and lining the two strips of the desired length and width.
- Sew the parts. At the center, attach and attach the top
And now turn the sewn split swimsuit into tankins:
- We measure the girth under the chest, abdomen and the abdomen. Again, we subtract 5-10 cm from these values.
- From the elastic fabric and the lining, two rectangles should be cut out. Stitch them to each other, making an assembly on each side.
- Top priklyte in front and stitched.
21. Create a tankini with an unusual top.
To create such a bathing suit, we take an elastic fabric of two colors. For tailoring bustier two scraps we pass one by one and get two cups of different colors. Sew the fabric on the back. We sew bright straps.
Next, we'll work on making swimming trunks: old bathing trunks are applied to the fabric, cut off, sewed, decorated with bright colored shoulder straps. The final stage: to create a tankin piece of fabric sewn to the top and get a completely new swimsuit.
22. Cut your swimsuit and get a stylish thing.
We need:
- scissors;
- centimeter;
- indoor swimsuit;
- elastic fabric of the same color as him.
Instruction:
1. Cut the fabric into small pieces. On both sides of the swimsuit, make small incisions.
2. Tie them up with scraps. For reliability, sew each knot with a needle and thread.
23. A regular bra turns into a colorful swimsuit.
It is necessary:
- old sconce;
- fabric for swimsuit;
- scissors;
- sewing machine or needle with thread;
- pins;
- clasp for a new swimsuit.
Instruction:
- Sew new fabric to the old bustier.
- Separately, we process the edges of a small pruning, which will decorate the place between the cups.
- Now you need to sew a buckle and straps.
24. Rhinestones and sequins will make your outfit stylish.
Simply decorate your top and swimming trunks with sparkling pebbles.
25. Learn how to tie a swimsuit differently.
Method number 1
We turn our bustier. So, straps, which were tied behind the neck, are now tied on the back.
Method number 2
This option is called traditional.
Method number 3
As in the first version, turn the top and cross the front straps.
Method number 4
This is the same method number 1, but thin straps at the neck are fastened crosswise.
Method number 5
Traditional bando.
Method number 6
Take the first option, then the fifth (bando) and tie straps around your neck.
No less interesting option to update an old T-shirt, which can be worn on a swimsuit.
To do this, use sharp scissors to cut diamonds on it, so that this net beauty can turn out.
Another great idea with a touch of romance
We take your favorite shirt, ribbon, glue and scissors. On the back with the help of a tape we form a heart. We glue it. We wait when the glue dries and carefully cut out.
Finally, another creation, which is created from an old T-shirt and with the help of bleach.
To begin with, we decorate old T-shirts with droplets of bleach. We are waiting for the result. Then cut off the sleeves and make a deep neckline. Front and back our shirt we tie up with scraps of cloth.