What will help to feel like a woman, not just a housewife? Of course, the dishwasher is an appliance into which you only need to load dirty dishes, pour in detergent and after a short time get creaks from the cleanliness of the plates and mugs. Than not every woman's dream! And if it finally came true, that is, you became a happy owner of a dishwasher, there is a case for a small - just connect. There are two options - to call the master or try their hand at connecting the dishwasher. And if you do not look for easy ways, our article is for help.
Dishwasher connection featuresTo understand the features of connecting the dishwasher , first you need to understand how it works. After loading dirty dishes, the device starts to pump water from the water pipe for washing. The device then heats the water to a certain temperature with a TEN to increase washing efficiency. A special detergent is added to the water. After washing, water is discharged into the sewer pipe.
It follows that the dishwasher must be connected in several stages, namely:
- installation of the device;
- power supply to it;
- connection to the sewage system;
- connection to water supply.
As for additional materials, then purchase the following at a specialized store:
- drain hose and valve;
- clamps;
- ball valve;
- socket with grounding.
A dishwasher hose is usually included.
Well, tools such as a drill, a knife, a level, a wrench, screwdrivers and wire cutters can be found in every business man.
In general, the whole front of the work can be seen on the diagram below. Let's consider each stage in more detail.
Installing the dishwasher
First, find the right place for your device. For a stationary device, only a level surface is important (as checked by the level) and a close location to the electrical network, water supply and sewerage. To install and connect the built-in dishwasher, usually in many kitchen sets, a niche is beforehand seen, so it is important that the dimensions of the device itself and the attachments to the furniture or wall attached to it are appropriate.
Power connection
Due to the high power consumed by the dishwasher during operation, it is recommended that a separate grounded power outlet be used from the electrical panel using a 2 mm diameter wire. In the electrical panel, install a 16A circuit breaker. In any case, do not connect two powerful devices (for example, an electric stove) to one outlet.
Connection to water supply
It is better to connect the dishwasher to cold water. The matter is that various substances harmful to the device contribute to the hot water of the centralized water supply system. On the pipe or hose, it is necessary to install a shut-off valve, which will prevent trouble in the event of a dishwasher flowing. We recommend using the most reliable copper pipes. To protect the heater of the device, install a filter
Connection to sewage
The dishwasher is connected to the sewer using a siphon. The entire drainage system (drainage), consisting of a valve and an additional tap, must be connected to the sink. Moreover, the drainage hose is first fixed on a wall or furniture at a height of 60 cm from the entrance to the sewer system, and then bends to the bottom so that the water will flow arbitrarily into the siphon.
After the work is completed, perform a test check of all dishwasher systems without loading dishes and detergent.
We hope, our recommendations on how to properly connect the dishwasher, will be useful to you.