Drywall is an indispensable material for leveling walls and ceilings, and also serves as a building element, it is made of arches, shelves, niches . There are various options for fixing gipsokartonnyh sheets - on profiles, glue or wooden slats. But, despite the type of fastening, the walls of plasterboard require plastering for painting.
Plasterboard plastering by our own hands - master class
- We recommend leaving the factory edge and pour it with filler like the rest of the seams.
- On the sheets of plasterboard, which adjoin the wall, we make an edge of 45 degrees. These sheets are curled about 4-5 mm from the surface.
- With the help of a putty knife putty fill all the grooves and level them.
- For alignment, take a small measure.
- In the longitudinal seams, lay the net. It is initially glued to plasterboard, and then it is covered with putty.
- We process all screws.
- The surface is practically free of irregularities.
- After all has dried, it is necessary to prime the gypsum board joints before the common putty. The surface is bandaged with a glassy fiber-zeal bandage. It is glued to the gypsum board with PVA glue.
- In the same way, the corners are glued, but only with paper tape. All residues of glue are carefully cleaned with a sponge.
- Cross stitches are treated in a similar manner.
- The paper tape is an addition to the glass grill, it serves as a tool against the occurrence of cracks.
- All the bandages are covered with a thin ball of finish putty. Let's completely dry it.
- All joints shpaklyuem a wide tool, after which you can assume the rough work is over. This option of finishing can serve for gluing walls with thick or liquid wallpaper. If the choice fell on thin wallpaper - it is necessary to cover the entire surface with another thin layer of putty.
When asked which shpaklevkoy shpaklevat gypsum cardboard for painting, we definitely answer that use the finish line and do not spend on starting, because the material itself has no irregularities.