If mold appeared on the tile in the bathroom, it is a signal to start the fight against it. After all, except for an unattractive appearance, mold can cause attacks of allergies and other ailments. Therefore, mold must be fought.
Most often, mold appears in those poorly ventilated rooms, where the humidity exceeds 80%, and the air temperature is above +15 ° C. It is this room is the bathroom. Let's find out what to do if there is mold on the seams of the tile in the bathroom.
How to remove mold in the bathroom?
There are several ways to combat mold in the bathroom. One of the most effective methods, how to clean seams between tiles from mold, is the use of vinegar and soda. Pour a little vinegar into a small container. Use a narrow brush to apply liquid to the seams between the tiles. After five minutes, wipe with a wet sponge all the places where you applied vinegar. After this, pour some baking soda into the plate. With a toothbrush dipped in water, collect a small amount of soda and wipe the stitches with mold. Then wash it off with water and clean it again.
There is a mechanical method of removing mold from tiles in the bathroom . A screwdriver or other sharp object removes the grout from the seams between the tiles. Then treat all the seams with vinegar, let them dry well and apply a new grout with a spatula. After completely drying it, treat these places with antifungal primer. This will save your walls for a long time from the appearance of mold.
It is good to destroy the mildew of tea tree oil. Its aqueous solution should be applied to the tile from the nebulizer. It is not necessary to wash off.
You can use industrial means to destroy mold in the bathroom. Copper sulphate fights well with the fungus, however it is toxic, therefore mandatory precautions are required when carrying out such work. Removes mold and preparation of Renogal, which should be used according to the instructions on the package.