Installation of blinds

Horizontal and vertical blinds remain the most famous models, despite the large assortment of goods. Their popularity is associated with affordable price and ease of installation. The purchased product is easy to install by yourself.

Installation of vertical blinds with their own hands.

1. We prepare materials and tools.
2. We can not do without a level, ruler, pencil, drill, hammer, tape measure and screwdriver. It is necessary to buy dowels and screws.
3. We check the components of the package.
4. In the event that the product must be attached to the wall, mark the pencil with the location of the brackets. For this, it is necessary to retreat 10 cm from the opening of the window from above and widen the lateral boundaries of the window opening by 15-20 cm. We also take into account the size of the gap between the sill and the product in assembled form.
5. Engaged in the assembly of brackets.
6. Install the assembled parts. To begin with, we prepare holes by inserting dowels and plugs there and fixing them with screws.
7. The fasteners, intended for a decorative strip, we catch on the cornice.
8. We fix the cornice by inserting its facepiece into engagement with the short edge of the attachment spring. Then click to snap the tail of the other edge of the attachment spring, so as to fix it.
9. Rope management collect sliders.
10. We turn them so that a slit can be seen.
11. Install the lamellae, inserting each into the mount until it clicks.
12. We insert the lower weights with the chain locks up.
13. We are engaged in connecting the slats at the bottom, using a chain.
14. We mount the decorative panel, closing its ends.
15. Installing vertical blinds on the window, check their work.

Installation of horizontal blinds.

1. We check the contents of the package. We must have horizontal blinds, fastening elements for the casement and the blind part of the window, as well as instructions for installing the product.
2. Unpack the blinds, unwinding the adjusting tape and removing the adjusting bar.
3. We fix the fastening elements on the bracket so that they do not interfere with the moving parts.
4. We try the blinds on the frame along the edge of the glazing beads and note the fixing points. The height of the product should be such that below it it is attached below the glazing bead. Be sure to use the level, as the crookedly attached blinds will spoil the whole view of the window.
5. We install fasteners.
6. We install the blinds, fixing them with special snap rivets.
7. We are engaged in lower fasteners, which fix the product on the sash of the window.
8. At the last stage we mount the adjusting bar and check the louvres in operation.