Fence from the mesh netting own hands

In some cases, there is a need to acquire a cheap and inexpensive fencing, which is easy to build without complex equipment. Having looked through a lot of options, many choose their own sectional fence from the net of the Rabinets, as it is not very difficult to install such a structure with their own hands and this task is being solved in a very short time. This material is delivered in rolls, it is convenient to transport it even in cars with a trailer. Rack for strong power is not required, because the load from the wind occurs here is minimal, and the weight of the grid is also relatively small. It is suitable as a fencing garden or a pond. By the way, such a grid creates a minimal shadow, which is very important when vegetables, shrubs or other plantations grow nearby.

Options for installing the fence from Rabitza own hands

If you are planning to build a temporary fence in a short time, then you will need a cheap stretching method for fixing the mesh. In this case, many do not fill the holes with a solution, but simply hammer the columns to the required depth. When it comes to long-term fence, it is better to make welded rectangular sections from the corner. Further inside this frame the mesh is tightened securely and fixed. Metal supports, designed for long-term use, should be concreted in a solution of cement, sand and gravel in a ratio of 1: 3: 5.

How to make a fence of your own by yourself?

1. First we make a breakdown of the territory. We pull the cord and put the tags. Then with the help of a hand drill we drill holes in 2,5 meters.
2. The drill can be used, both factory, and self-made. The main thing is that drilling holes in the ground is easy, and the diameter of the hole corresponds to the pipes that you use as posts. In our case it was necessary to drill the earth to a depth of 1 m.
3. In the area where the wicket is installed, the width between poles is 1 m.
4. Supports in our simplest case were not poured with concrete, but after hammering with their hammer, a dense ramming of the soil was made.
5. At the level, we check that the neighboring poles are at the same height.
6. In addition, it is necessary to control the vertical position of each support by the level.
7. Hammer the pillars of the hammer into the ground better with high and reliable portable building goats, working together. It is advisable not to strike directly on the pipe, but use a wooden lining so that the support is less deformed.
8. The first neighboring poles stand exactly, you can proceed to install the following pipes.
9. It is clear that we have a whole series of pillars almost perfectly smooth, both in height and vertically.
10. We weld the bottom row of the reinforcement. All markings are made not from the ground line, but from the top point of the support at a distance of 1.9 m. This is done for the reason that the soil on the site is not even. The second row of fittings is welded at the highest point of the pipe.
11. We begin to tie the fence from the mesh netting with our own hands to the fittings with a knitting wire.
12. On top of the grid all cells are threaded onto the reinforcement and the ends of the wire are well crimped.
13. For reliability, the frame can be bandaged in the middle with a fitting, welding a figure like a triangle, thus providing additional rigidity to the fence. The grid should be stretched as tight as possible, otherwise it will quickly sag.
14. To the last posts and to the gate we mount the netting, using a specially welded reinforcement so that it does not go over the edges.
15. The bottom is also tied with a knitting wire, then pouring the soil along the whole perimeter of the fence closely to the grid.
16. The work is almost finished, we have got a smooth and long fence of rabitsa.

Finally, we note that it is also not difficult to join the rolls of the grid. For the connection, not a binding wire is used, but a previously twisted spiral, which the pieces put together next to each other are sewn together. You see, it's easy to build a fence from the metal net of the Rabinets with your own hands, even without having for this special knowledge.