A woven fence made of boards is an exclusive and unusual fencing that looks extraordinary and attractive. In the country section, in addition to the function of fencing and protection of the territory, it will perform the role of decoration. In the manufacture of this type of fence is not complicated.
Methods of weaving the fence
To install the fence used plank boards, before they are treated with antiseptic, primer to protect the material from insects and the appearance of fungus.
For the erection of a fence, supports are made of wood or metal at a width of two to three meters. To ensure that the structure does not loosen, poles are better to be concreted.
Supports that are decided to be additionally faced with brick, stone, or concrete pillars? usually fill the foundation with the entire length of the fence. Such a fence will look more solid.
Fence weaving is carried out in the same way as before when using a flexible vine - horizontal or vertical weaving. Only as a material selected boards.
A woven horizontal fence of boards assumes their laying parallel to the ground. For such a fencing in the span, the first pair of vertical rods are assembled, through which weaving will be done. The fence is attached to the supports by nails or self-tapping screws, especially the ends of the boards.
In a vertical wicker fence of boards two or three crossbeams are attached, through which a zigzag material is laid perpendicular to the ground. When weaving, the transverse lugs should be framed with boards on both sides. The first two bars are set clearly horizontally, the work starts from the post. The upper board is often attached to the racks without weaving. To fix without a braid it is possible and the bottom crossbar to supports.
Both the first and second weaving methods look very beautiful. The design of the woven wooden fence is kept at the expense of the tension created by the bent board. The strength of the structure is determined by how densely the boards are laid. The lower gap can be laid with a brick or stone.
Wicker board fence - beauty and originality
Variations for the execution of a woven wooden fence of planks are many, it all depends on the imagination of the performer.
For example, the use of narrow and wide boards, allows you to create different in appearance fences. The braided fence is more durable than the analogue of the vine, and it is also made easily. To increase the service life of the fence, it must be covered with the finish coat - paint, varnish, colored varnish.
An interesting option may be the coloring of the fence in two shades. For example, the bottom is dark, and the top - light. After several years, the processing with lacquer-colored materials must be repeated, so that the fence retains a beautiful appearance and has served for several decades.
Decorative functions - only one of the advantages of this structure. In addition, there are many advantages: simplicity of installation, use of natural natural materials, providing reliable protection against uninvited visitors. In addition, this design is of low cost and looks much more expensive, given the finance for its installation. A similar fence can be installed even from old boards that have not lost their fortress.
Wicker fences are now very rare, and the use of plaiting boards makes it possible to make an original decoration from the fence. In combination with structures from other materials, they will look harmonious on the countryside. The structure looks laced and light, it fits perfectly into the landscape design.
| | | |
| | | |
| | | |
