Transformer table by one's own hands

Furniture-transformer is now very relevant. It is actively used in various interiors from classics to high tech . All sorts of folding sofas and beds, tables and chairs, all this improves the quality of our stay in our own walls and makes life more comfortable. For quite understandable reasons, quality furniture can not cost a penny. And if she also has several functions to perform, then you have to part with an impressive amount of money. But practice shows that it's quite possible to make a convertible folding table, multifunctional or two in one. The process of manufacturing such a table will be considered below.

Coffee table-transformer yourself

Very much in demand furniture in the so-called industrial style. It's like unfinished, a bit rude and looks stylish at the same time. The simplicity of its appearance is achieved by the thoughtfulness of each size and the use of the most accessible and simple materials.

1. This is how the drawings for the transformer table look like, which we will do with our own hands. For its production we need a wooden plate, boards and bars, as well as screws for height adjustment.
2. We begin work with the manufacture of goats. In the drawing, all dimensions are indicated in feet. The legs for the goat must be cut at an angle of about 15 degrees.
3. Next, install the two upper jumpers. To connect all the parts we use the so-called dead screw. Then the whole structure looks neat and at the same time it can withstand loads well.
4. Next, install the lower jumper.
5. We make holes for the screw adjusting the height of the table.
6. Well and further it will remain only to establish the table top.
7. The last stage of making the transformer's coffee table with your own hands will be varnishing and polishing with sandpaper.
8. You can use it both as a worker and as a coffee table.

Computer table-transformer yourself

The desktop is not always convenient to use only when sitting. Sometimes it is more comfortable to work standing up for one reason or another. Similar constructions are already on sale, but it is quite possible to make such a table.

1. This version of the transformer table, which we will do with our own hands, looks like this: by counterweight, you can adjust the height of its location.
2. On the millimeter we pre-build the drawings for the construction of the transformer table with our own hands. All dimensions are in feet. Now we will decipher the details of the table:

• A - working surface of the table;
• B - the surface of the stand for the monitor;
• D- the back of the table;
• C1 and C2 - sidewalls for the monitor stand;
• E1 and E2 - long parts of the box for the counterweight;
• H1 and H2 - short parts of the counterweight box;
• J1 and J2 - the side of the box;
• F and G are the details for the pocket.

And here are all the parts of the frame from the profile. In the drawing A - frames of the frame or frame, B - horizontal support legs of the frame, C - the part that will just slide.

First, we collect the box for the counterweight.

Next, we begin assembling the frame or frame.

Here you can see the node, where also the profile for sliding is fixed.

We will collect the basis of the table and its working surface.

We lay our shelf for the monitor and note immediately on the table top and side panels of the attachment point.

We set the mechanism for changing the height.

Install the counterweight. At this stage, you will be able to adjust the operation of the mechanism and correct the parallelism of the racks if necessary.

Now fix the countertop to its permanent place.

Here are the rollers for changing altitude.

Make a hole to conveniently hide the wires.

But actually the desktop itself is a transformer made by own hands.