The owner of a private house will tell you that the work on the site does not cease for a minute. In the spring, planting begins, in the summer, efforts to care for the garden, in the fall, we begin harvesting and preparing. And in winter, with precipitation becomes even more difficult, because the snow needs to be cleaned and clear the area around the house. And no matter how good your snow shovel is , it is unlikely to effectively clean large areas with it. A rotary snow-removing nozzle for a motoblock will save money, but it will work no less efficiently than a snow-removing machine.
What is a motor-block with a snow-removal nozzle?
This attachment is attached directly to the power take-off shaft of the motor block. When working, the snow is sorted inward and scattered in different directions, paving the way. You can adjust the snow throw angle at your discretion.
The models of the snow-removal attachment on the motor-block differ in width (as a result of the width of the done track), productivity and weight, range of snow throwing and a number of other parameters. That's why you need to choose the rotary snow-removing attachment for the motor-block necessary according to the described parameters, where the motoblocks themselves are indicated, to which the selected nozzle model can be connected.
For example, you decided to pick up a snow-removing nozzle on the motoblock "Salute". This option is suitable for snow removal only on level surfaces. There are two modifications, differing only in the way of attaching to the motor block. The snow-removal attachment to the "Salute" motoblock can remove snow if its thickness does not exceed 17 cm. At the same time, it can capture 500 mm. The snow-removing attachment to the Niva motor-block will capture approximately 60 cm
How to use the snowplow attachment on the motor-block?
In the manual there is nothing complicated, and you can easily attach the nozzle. However, it is important to use the equipment competently. Approximately half an hour after the work of the nozzle just put in, it is necessary to check the tightening of the fasteners.
Before work or every five hours, it is important to check the tension V-belt as well as tightening the threaded connection. The body has a special adjustment bolt, which also needs to be checked every five hours. With constant control of fasteners, the work will be correct and the equipment will last a long time.