In those areas where many species of trees grow, fences made in the form of a stockade, a fence or a fence can be found. The fence of the braid appeared a very long time ago. And in our modern age of stone and metal fences the braid is rare, although this fence looks very original and beautiful.
Fence braided from branches
It is easiest to make a fence of alder, alder, willow, birch and hazel, because this material is thin and docile. You can find a braid from cattails or reeds. Such a wicker fence is original, beautiful and eco-friendly. It is easy to build, and it is quite inexpensive. However, such a decorative fence for a short time will not last long, and protection from other people's penetration is weak.
The rods for weaving the fence must be harvested early in the spring or late autumn. Collected branches should be well dried and stored before work starts in bundles. 15 minutes before the beginning of the work on making braids from the vine, the rods must be soaked in water. This will give the vine more flexibility and flexibility. As a basis for the wicker fence you can use wooden stakes or metal bars. Weave branches can be both horizontally and vertically.
If you want to paint such a wattle fence, the rods must be pricked beforehand, and then painted. This wattle can be covered with a solution of potassium permanganate, iron sulfate, stain or matt varnishes. If you prefer unclean tyn, then you do not need to remove the bark from the rods.
The braid can be built from pvtv pvc. Such a fence made of plastic will be more durable in comparison with the product made from natural branches.
| | | |
| | | |
| | | |
Fence from boards Austrian wickerwork
Not so long ago there was another kind of wooden fence - braided Austrian vertical and horizontal. The technique of making such a wooden fence is similar to weaving a fence of branches, but instead of thin rods here boards are used. The weaving itself can also be vertical and horizontal.
The fence of the plaque from the boards reliably protects the wind, but the fence itself can be easily blown. As support, you can install metal, concrete or wooden poles. The boards are taken three meters long. And the material can be non-planed, and smooth, although with a planed board the fence will look more presentable.
To decorate the plaits from the planks, you can install so-called houses - the caps for the top of the posts. This will give the fence a complete view, and also protect its ends from getting wet. An additional decor can also be special gussets that cover the seams. The lower closing bar is set to complete the entire composition.
| | | |
| | | |
| | | |
