Plow for motoblock

A plow for a motoblock is used for processing small land plots intended for plowing. It is an excellent alternative to a tractor, which is inexpedient to use in small areas.

Types of plows for motoblock

There are such basic types of plows for motoblocks:

  1. Single-hull. It has in its device only one share and is used to treat the soil, light in its composition. The most common electric motoblock with such a plow, because it is designed to serve small areas and does not differ large capacity.
  2. Revolving or reversing. The ploughshanks have the shape of a feather and are bent upward. This type of plow is designed to handle a much harder soil. After that, the soil becomes friable, weeds almost cease to grow on it.
  3. Rotary plow for motoblock. It is equipped with several shares. These parts are fixed on one axis and have a curved shape. When the turn-on occurs, the axis begins to rotate and turn the soil. The unit is capable of processing soil at a depth of 25-30 cm with a minimum effort. A feature of the rotary plow is that the movement can be carried out not only along a straight line, but also along various trajectories. The unit can easily cope with even very dense soil.
  4. Disc plow for motoblock. It has in its design spherical disks, which cut the soil with sharp edges. The unit is capable of processing hard, heavy and heavily moistened earth. It is convenient to use for plowing, which is carried out in early spring.

Dimensions of plow for motoblock

When determining the size of the plow, the following conditions should be considered:

How to hang a plow on a motoblock?

In order to hang the plow on the motor-block, the following steps are carried out:

  1. Motoblock located on the site, where they will carry out the work, remove the wheels with rubber tires, install ground-gripping wheels of steel. This helps reduce the slippage of the motoblock.
  2. Attach the plow of the motor block to the attachment. In this case, the nuts are not fully tightened. This makes it possible to adjust the unit.
  3. The plow is fixed to the fixing bracket of the motor block with the help of two steel pins.
  4. Adjust the plow on the motoblock.

Planting potatoes under a plow with a tiller

Planting potatoes under the plow motoblock makes this process much faster. This method can significantly help in the processing of large areas.

Landing is carried out in such stages:

  1. The soil is loosened to a depth corresponding to the bayonet's bayonet, using mills that are installed in place of the wheels.
  2. Then the milling cutters are changed to grousers, a plow is installed. With the help of the unit, turn the ground, make the first furrow into which the tubers are laid.
  3. Plow unfold, set the right wheel into the furrow directly to the landing. At the first speed, a new strip is laid, and the previous one is covered with earth.

Thus, the plow for the motor block will greatly facilitate the processing of your site.