How to make a heart out of modules?

Origami technique allows you to create from paper almost any composition from simple animals to real locks. Let us consider two variants of origami schemes for hearts from modules.

Volumetric heart from modules

For work, we need to prepare 38 square sheets of paper, scissors with glue and a needle with a wool thread.

1. In this case, for the origami heart of the modules, we will use squares with a side of 8 cm, as a result, the height of the craft will be approximately 15 cm.
2. Fold the square diagonally, then unfold and fold again on the second diagonal. We leave in the combined kind.
3. We bend in turn the lower corners. First we make one bend to the line of the diagonal, then the second time (like turning into a pipe).
4. Here such figure should turn out.
5. Bend the edges on the sides.
6. Next, add the edges, as shown in the picture.
7. We bend and refuel to the center.
8. Here is a blank for the heart of the modules in the origami technique should be obtained.
9. We do all the steps with the other sheets of paper.
10. Now you need to make squares out of these blanks. Apply them one to the other and fill the triangular edges into the pockets. In total, 17 such blanks are needed.
11. Of the remaining, we make triangular details.
12. To do this, each module is folded in half diagonally. Then fill the edges in the pockets.
13. The origami scheme of the heart of the modules is as follows.
14. Now consider how to make the heart of the modules from these blanks. With the help of woolen thread begin to collect, starting with two squares on the left side. We open the top pockets and thread the thread diagonally. We fill the edges back.
15. In this way, we fix all vertical lines from squares.
16. For triangles, the needle will be inserted into the vertex. For fixing from the side, open one pocket, insert a needle and then refill the edge again.
17. All the vertical rows are assembled.
18. Next, we will work the thread horizontally in the same way.
19. We tie up the edges and hide the thread in the pockets, fixing them with glue.

Heart of triangular modules - circuit

1. Before making a heart from the modules, you need to prepare 48 triangular modules.
2. First, in a linear order, we collect the blanks, alternating the shades.
3. Of the 24 parts, bend the series and get one half of the heart.
4. Two blanks were obtained.
5. Consider how to make a heart from the modules. We extract the last block from both halves. Next, we insert one part into the other, as shown in the figure.
6. We join the other half.
7. This is how the design looks from the back side.
8. The upper part is fixed with glue.
9. Here such simple crafts from modules in the form of heart at you will turn out.

From the modules you can make other crafts, for example, volumetric vases .