The door block, basically, consists of two parts: a door frame and a cloth. The kit includes a door handle and a lock with a locking mechanism. You will also need two or three door hinges.
Master-class on door installation
To understand how to properly install interior doors yourself, you should try to do it in practice.
We bring to your attention the instruction: how correctly to establish an internal door with own hands for fifteen minutes:
- prepare and check the required set of fasteners;
- set the level to the wall, since, most likely, it is not even;
- a special marker mark places for the installation of bolts;
- drill holes for bolts;
- in the drilled holes we twist the dowels;
- screw the screw, adjust it to the level;
- we measure the width of the upper clypeus , add to it fourteen millimeters and get the desired length.
| |
| |
| |
| |
Perform measurements with the same tape measure. Measure both the right and the left side necessarily. They are not always the same. Experienced professionals who know how to properly install the interior door, recommend: on the outer edge of the beam leave a gap for mounting foam with a width of one centimeter. Further:
The preparatory work is finished and the box can be installed:
- apply the box and mark the insertion points of the mounting plates;
- attach the mounting straps to the box;
- set the box on one side of the level, fix the nut.
| |
| | |
The first side of the door frame is now installed.
- we put on the second side of the box, adjust it according to the level;
- check the level;
- tighten all nuts;
- We hang the door and adjust the gaps.
| |
The box is installed. Check the work of the door: whether there are any distortions and discrepancies in the size of the gaps between the box and the cloth. How to properly install the door if it is on MDF-based? The most important thing is that when installing, use not self-tapping screws, but mounting plates, similar to those used in plasterboard structures.
Then you need to fill the gaps with mounting foam. If you zapenivaet gaps without a door, then install in the doorway special struts with screw adjustment. The last point of the instruction on how to properly install the doors in the house is the nailing of the clypeus covering the seams.