Facing tile for facade

Modern facade materials gradually replace the traditional plaster , the lining of walls with wood or brick. Now, with the first type, you can not determine from what the dwelling house is made. Finishing plates or panels so qualitatively imitate a stone, a brick or a bar that from a distance they are extremely difficult to distinguish from the original. Analogues have one more serious advantage - a relatively small cost. Expensive natural stone has turned into an elite material that only well-off people can buy. Therefore, facing tiles for facades, which are more affordable for ordinary citizens, are increasingly popular.

Advantages of facing tiles

By its strength, the tile is much superior to plaster, but it has much less weight than the stone . For some other important parameters, this material looks much better than cheap polymers. For example, facade tiles for facades are not afraid of ignition, and it is completely non-toxic. The initial components for its production do not harm the environment and living organisms. Of course, we can not fail to mention the durability of this material. If the technology of finishing works was not violated and high-quality tiles were purchased, then the owners can not be afraid that their house will lose its presentable appearance over time.

Types of tiles for the facade of the house

  1. Tile of concrete . This type of facade tile is quite strong, durable and most affordable. There is no need to use firing, which significantly reduces the cost of it. If before the concrete tiles were of exceptionally natural color, now in the production of various coloring pigments added to the solutions, which allow diversifying the range of products.
  2. Ceramic facing tiles for facades . The production of this tile in many ways resembles the manufacture of bricks. But its thickness is much smaller. Mounting is carried out by wet or dry method. In the first case, the process resembles the same works as in the tiling of internal walls. In the second case, it is necessary to mount the frame, to which the tile fixing is done by screws, and between them it is fixed by a locking mechanism. This method is somewhat more expensive, but it allows you to install a vapor barrier film and a heater on the walls.
  3. Porcelain tiles . In addition to clay, there are also quartz and feldspar in the composition of the granite. In the process of roasting and pressing, a beautiful monolithic material is obtained, not inferior to the natural stone. Facing tiles for the facade of porcelain stoneware for more than half a century is used in construction, and it has earned a reputation for a very high-quality and attractive-looking material.