Many people think about how to get rid of white mold in the cellar , because this room, which is under a layer of ground a few meters, is an ideal environment for the multiplication of all kinds of bacteria, spores, etc. I must say that its disinfection must be carried out regularly, and it is also necessary to exclude the reasons provoking the threat of a crop on the walls.
How to remove mold in the cellar?
To do this, there are a variety of means, but whichever was chosen, first of all it is necessary to remove the top - the struck layer of plaster and the top layer of the floor, if it is earthen. Here are the options for preparing effective means of combating the fungus:
- Place a piece of sulfur in metal or ceramic dishes, close all ventilation openings and set it on fire. Quickly leave the room and close the door tightly behind you. By the way, in the household chemical shops you can buy special sulfurous sacks. After two days, you can start airing the room, skid racks, shelves and supplies for the winter;
- it is possible to whitewash the basement with a solution of bleach and formalin on water;
- good solution has a solution of hydrated and bleached lime, taken in equal parts;
- if a white mold appeared in the cellar, then such composition will help to cope with it: 100 liters of copper vitriol and 1 kg of fresh slaked lime per 20 liters of water. If there is an opportunity to get clay, then it is possible to prepare such a solution: add 1 liter of copper sulphate solution and the same amount of clay into the water in a volume of 10 liters.
In any case, it is necessary to identify the reason for mold formation in the cellar. If everything is a matter of poor ventilation, it is necessary to conduct a detailed examination and if it is clogged, it is good to clean it with a dense brush. With the waterproofing of the foundation and the floor, things are more complicated, because usually such work is carried out at the stage of building an underground room. But if the level of groundwater without waterproofing increases, it means that to eliminate white mold in the cellar it will be necessary to cover the floor with a layer of small gravel, pour bitumen and until it has frozen to cover waterproofing material, which uses sheets of roofing material.
In the future, those who are interested in how to remove white mold from the cellar, you should pour the floor with concrete. If the ceilings in the cellar are too low, then it is more appropriate to use a clay lock. To do this, the floor is covered with a layer of clay, it is rammed, covered with dry sand and poured with a cement screed.