How to make the kitchen set?

To assemble furniture with own hand from ready-made parts or cut them out of an array is something like a challenge for couples who plan to develop and implement the kitchen design completely independently. Below we will consider three ideas how to make the kitchen set itself, both from finished parts, and completely from scratch.

How to make a chest of drawers for a kitchen set with your own hands?

1. The first option is to make a chest completely from scratch. Your task is to assemble the frame from the table top and side panels. The most difficult and lengthy stage is the work on the boxes.
2. For work we will need not only drawings and exact sizes of boxes, but also a special machine. The fact is that we will not collect the details on the screws or other fasteners, but with the help of the so-called swallowtail. This method of assembling by cutting out furrows by the type of this tail.
3. Next, the details are inserted one into the other, the groove in the groove, and glue the entire surface of the edges without a single blank.
4. The finished collected box is additionally fixed with clamps and so left until the glue has dried completely.
5. The drawers are ready and it's time to start assembling yourself one of the parts of the kitchen set . We always work on all the boxes with sandpaper, then cover with either a layer of varnish or a special wax.
6. Further we put boxes on the places and the chest of drawers is ready.

We make a mobile island for the kitchen set with our own hands

Now consider the process of manufacturing the so-called island . But in our version it is a mobile additional section for cooking and storage at the same time.

1. First, according to the drawings, we cut out the details of your island. In general, it differs little from the chest, but instead of the back wall we will use a type of through-rack construction. Boxes will serve as wicker baskets.
2. Mobile this island will make wheels. It is important to place them as close to the edges as possible so that the whole structure does not tip over.
3. Further we put a table-top and we outline position of fixture. We turn and fix the table top to the frame.
4. Now we attach to the wall metal corners something like a table.
5. As a result, our island can call in a stationary rack.
6. In our version, a trash can will be installed inside, therefore in the counter there is a square hole just above it, so that it would be possible to swipe the remnants of cutting after cooking.
7. In this version, making a kitchen set with your own hands will not take you much effort and consumables, and the process itself will be very creative.

How to make a kitchen set with your own hands from ready-made parts?

And, finally, the third master class, where we will examine the installation of all cabinets from the very beginning. Furniture is ordered and delivered in disassembled form, so we will collect it directly on the spot.

1. So, open all the packages and lay out the parts of the cabinets.
2. We begin to assemble the frame according to the instructions.
3. Next, directly to the floor we will fix the podiums for furniture and on them to install the finished frames in assembled form.
4. After installation, we always check the level by how horizontally our frame has risen to its place horizontally.
5. All the cabinets in their place and it's time to clean the building dust.
6. Then follows the decor of the kitchen set, which is installed by oneself, or, more precisely, the installation of the doors. At this stage, we select the embedded technology and install it in its place.
7. It's time to do all the measurements and cut out the countertop under the order.
8. After all parts of the kitchen set, assembled with their own hands, fell into place, the table top is also installed, only minor improvements remain and the work is completed.