A mouse without wires will provide you with greater mobility and will give you a lot of free space on the table. Fortunately, hateful wires are gradually leaving our homes and offices. Use such a device is very convenient, and the connection does not take much time and effort.
How to connect a wireless mouse correctly?
There are two main methods. The first is to connect the receiver, for which you must first insert the batteries into the mouse. For the receiver, the batteries are not needed, since it is powered by a computer through the USB connector. If the system uses a mouse port, you will need an adapter.
The receiver of the mouse has a USB-plug, but with the help of the adapter it can be connected to the port for connecting the mouse.
The next step is to connect the mouse to the receiver. To do this, place them next to them, pay attention to the button on the receiver - press it. Then find a tiny button on the mouse from below, which is usually pressed with a pencil tip or a paper clip. Simultaneously press the 2 buttons and hold for 5 seconds at the shortest distance between the mouse and the receiver.
It should be said that the latest models of mice do this procedure - they are ready to work immediately after unpacking.
By connecting a wireless mouse to a laptop or PC, you need to find a permanent place for the receiver - it should be no more than 2.7 meters from the mouse. For example, you can install it on the monitor, the back side of the laptop screen, on the system unit or simply on the desk.
Be sure to restart the computer if you connected via the mouse port. If the connection was made directly via USB, you can immediately start using the mouse. And to customize the mouse for yourself, use the disk with the software bundled with the mouse or download the software from the manufacturer's site.
If you do not know how to connect an optical wireless mouse to the tablet, use the second method. Start, again, with the batteries, then turn on the bluetooth and make sure that your device is detected (the LED indicator on the mouse starts flashing). Follow the instructions of the instruction that appeared on the screen. Customize the parameters of the mouse for yourself and you can safely start using it.
For greater convenience, consider the possibility of simultaneously purchasing a wireless mouse and keyboard. In this case, you can pick them up in the same design. Connecting the same keyboard is similar to connecting a mouse - the process is fairly simple.