How to apply decorative plaster?

Ways how to apply decorative plaster , a great many. Depending on the chosen tool and the nature of the movements, you can get a completely different effect on the finished wall. This is a very creative and fascinating process.

Preparatory work

Before you do work on how to apply decorative plaster yourself, you need to do the preparatory work.

1. It should be treated with a normal primer or primer-impregnation. This will further allow the plaster to lie flat on the surface, not fall into the cracks and not soak into the walls. Also, preliminary priming will increase the degree of adhesion of the plaster to the wall, which means that it will prolong the life of the finishing coat.
2. It is also necessary to prepare a mixture for decorative plastering of walls. Usually, the plaster is sold in the form of a powder, which needs to be mixed in accordance with the instructions on the package. At the same stage in the mixture should be added color, if you want to get a uniform color coating on the walls. You can leave the plaster and white, and then, if desired, paint the already dried walls.

How to apply decorative plaster?

Then begins a truly creative process. The fact is that there are no strict requirements on how to correctly apply decorative plaster to walls. It all depends on the desired effect. Follow is only to ensure that the coating is uniform and dense enough over the entire surface of the wall.

1. The first method of application is with a wide spatula. If large particles are added to the plaster, then the surface will not be perfectly even. A different effect can be achieved by moving the spatula horizontally, vertically or in a circular motion.
2. To get an interesting wave effect on the walls, you can use a wide brush with a stiff bristle and make it a wide semicircular brush strokes.
3. To create the necessary texture, you can use special rollers or stamps
4. Finally, in order to render the texture of the plaster, you can walk along the already applied layer on the wall with an ordinary plastic bag.
5. After application to the walls, the plaster is dried, then lightly sanded to remove sharp corners and covered with a special finishing compound or wax.