Hammock support

Hammock is an excellent device that allows you to enjoy the rest at the cottage. But it happens that there is no suitable place for its consolidation. In this case, the optimal solution to the problem will be making a stand under the hammock.

How to make a stand under a hammock with your own hands?

The first step to making a hammock is to prepare the basics. Dimensions of the stand under the hammock assume the presence of wooden beams 50x100 cm. In addition, you will need:

Performance:

  1. The starting point for the beginning of the work will be the preparation of the drawing of the stand under the hammock. It depicts the design of the bottom, connecting and supporting rods for a hammock, located at an angle of 60 degrees from the ground.
  2. Below is an example of a drawing with the necessary dimensions of the stand under the hammock.
  3. The sequence of works, which are carried out during the manufacture of the stand, assumes the following actions:
  4. Prepare 2 bars for connecting and supporting rods, at the edges of which drill holes for bolts.
  5. The workpieces for the lower part of the carcass are placed on the transverse supports for alignment.
  6. Billets of the frame are connected with bolts.
  7. Connect and fasten with bolts of holes between the packs and the stop, located closer to the center of the beam.
  8. During the work, it is checked that the angle between the supporting rods and the ground is not more than 60 degrees.
  9. Make a mark in the place where the connecting and supporting rods intersect. Then the angle of thrust is cut to a close fit to the support rod.
  10. Cut the lining of the bar. From fix with self-tapping screws to the connecting rod on both sides.
  11. Screw the screws with hinges in place of attachment to the frame.
  12. With the help of self-tapping screws, the cross-members are attached to the lower bars. This contributes to the stability of the structure.
  13. The construction is polished, painted with stain and varnish.

Frut hammock support

You can purchase a ready-made device. One of the options for finished products will be a stand under the hood Frut. This is a reliable construction of steel pipes. It can be delivered in any place convenient for you. The stand is capable of supporting a weight of up to 120 kg.

Dimensions of the stand under the hammock are: 110x300 cm, its weight is 8 kg.

Stand under the hammock will provide you additional comfort during the rest at the cottage.