Garden arbor with their own hands

When the question of the expediency of constructing arbors or similar structures with your own hand is decided, first of all the goal is to save money. And in fact, in most cases you get money saving, and even embody your own ideas in life. In fact, there are a lot of options for garden arbors, which you can build with your own hands. We will consider one of them.

How to make a garden gazebo with your own hands?

We will begin our work by considering the design of a garden gazebo made by our own hands. In our case it will be a classic square construction with covers and a small fence. The so-called semi-closed type. Before we make a garden gazebo with our own hands, we calculated its dimensions and selected the right material. This is a wooden beam, boards, flooring and blanks for the formation of the roof.

1. We will start the construction of a garden gazebo with our own hands from the ground up. From the timber we collect the frame, which will become the floor of our gazebo.
2. In the corners we excavate small in diameter, but deep holes. This is a workpiece for pouring piles. As piles, we also take the bar, dig it, fix it with the main frame and fill it with cement.
3. We begin the formation of sex. To do this, we take the same bar that for the base, we begin to lay the stiffeners of the floor.
4. Next, proceed to laying the floor itself.
5. The foundation of our garden arbor, built by our own hands, is ready.
6. Now in the upper part of the corner beams we cut out the seats under the beams, which will become the foundation of the roof.
7. Fix the beams of the roof. The box is almost ready now.
8. The third part of the construction of a garden gazebo with their own hands is the formation of a roof. We begin with the installation of rafters.
9. Gradually build the skeleton of the roof.
10. To strengthen the structure, we additionally add spans between opposite walls, fixing boards and rafters.
11. At the ends of the rafters are like this: to connect them to the frame we cut the grooves, cut the edges at the same angle.
12. The ends of the corner beams are cut at an angle.
13. Now you can make the edging, nailing the beam and closing the edges of the rafters.
14. The most painstaking part of the construction with their own hands even simple garden arbors refers to the roof overlapping. First, we close the spans between the beams of the OSB sheets.
15. Now you can proceed with the final formation of the roof.
16. In addition, we fix the reinforcing planks between the vertical supporting bars and the frame.
17. We install additional supports for the construction of the fence.
18. Next, from the boards we form the fence frame.

The garden gazebo, made by own hands, is ready.