Picking up material for the fence of a private house , many people rely on reliability and long life. And these parameters are fully answered by the profiled worker, or as the specialists of the "metal profile" call it. The profiled sheet is a cold-formed sheet profile with a trapezoidal shape of the corrugation. It is proved that this form provides the greatest strength and reliability of the product. Depending on the type of coating for the manufacture of fencing, the following types of corrugated board can be used:
- With polymer coating . Due to the use of organic polymers sheets such sheets can be painted in any shades. In addition, polyester is also used for production, which provides resistance to climatic conditions and protects against fading.
- With zinc coating . A cheaper type of coating, which has a characteristic metallic tint. It is usually used for internal fences that separate the yard and the neighboring territory.
As a rule, a metal fence is made of a profiled sheet with a polymer coating, since it is possible to choose the right shade or even a pattern.
Types of fences from proflista
Inventive builders have found several ways to use such a simple metal profile material. Today, it is possible to make different types of fencing, namely:
- A classic continuous fence . Its height can be from 2 to 3 meters. The structure consists of metal piles and lugs attached to them, which serve as the basis for fixing the profiled sheet. The installation of this fence takes a little time, while it does not go to the detriment of the quality of the partition.
- High fence . Its height is from 3 to 6 meters. In private houses it is rarely used, more often they are enclosed by warehouses and industrial enterprises. Six-meter fences made from corrugated board and foam is also installed along busy roads to reduce noise from passing vehicles. Penoizol in this case acts as a sound absorber.
- Fence of profiled sheet and brick . Usually the function of the base is performed by steel pipes, but the use of brick pillars overnight transfer the fence into the elite category. For masonry, a ceramic brick of red or yellow color is used. Above the brick poles are protected by metal caps or special concrete parapets. It should be noted that this fence is difficult to build, because it needs a strong reinforced concrete foundation.
- Fences imitating under a stone / tree o. Recently, it became possible to apply to the metal profile drawings that imitate natural materials. Very unusual looking profiled sheeting with a brick or stone. You can also use sheets with a print under the tree. Fences from them look so natural, that to understand that this is only an imitation can only be close.
Device for fence from proflista
Before installing the fence, you need to study the terrain and calculate the height differences. Then, on the prepared area, holes are drilled for the bearing piles, which are poured with concrete. The posts are set at a distance of 3 meters. When the foundation is solidified, it is possible to begin the installation of steel cross profiles. To do this, use a profiled pipe with a cross section of 40 mm. The number of logs will depend on the height of your fence. At a height of 1.6 m, two profiles will suffice, and at a height of 1.6-2 m, three profiles will have to be installed - bottom, top and center. For the installation of logs, it is better to use electric welding. When the base of the fence is ready you can fasten the corrugated board to the logs. For this, self-tapping screws for metal are suitable.
| | | |
| | | |
| | | |
