Decorative facade plastering bark beetle - it's very beautiful and, most importantly, quality coating for the house. In addition, the material is environmentally friendly and safe, it is ideal for finishing residential and public buildings.
The plaster dries very quickly, in just 4-6 hours, then it can be dyed, and after a day it is not afraid of frost, rain and other atmospheric influences. So this coating is an excellent choice for home decoration.
Properties of facade plaster bark beetle
For sale plaster in dry form in bags or already ready - in buckets. You can purchase a facade plaster of a bark beet of the right color or white and paint it in any shade.
Depending on the grain size, the material consumption differs. The larger the grain, the thicker the layer, and, correspondingly, the material consumption increases. Optimum is the indicator of 1.5-3.5 mm.
Facade plaster for outdoor work bark beetle looks like a bark, eaten by a beetle. Of course, there are actually no beetles, but the effect is obtained from the granules that are in the mixture.
Plaster can be applied on almost any surface - brick, concrete, gypsum, cement-sand plaster, particle board, foam, plywood and so on.
Finishing the facade with bark beetle
Before applying the facade plaster, it is necessary to properly prepare the surface. Uneven walls need to be leveled, but you can not especially try, because the bark beetle will cover small irregularities. The main thing is that the size of the depressions and bulges should not exceed the grain size in the plaster structure.
Further walls are treated with a special primer of white color or shade, close to the shade of the plaster. This is done so that dark walls do not penetrate through the layer of the bark beetle.
After 6 hours after the primer has dried, a bark beetle can be applied. To do this, you will need a grater or a spatula made of stainless steel for application, a grater for structuring, a drill with a stirring nozzle and a large bucket.
If the plaster is dry, it must be kneaded according to the instructions on the package. Apply a thin layer equal to the size of the stones added to the plaster - they specify the thickness of the coating.
After a careful application and removal of surplus, you can begin to structure with a float. Moving it along this or that trajectory, you can get different drawings. So, wiping up and down, get the "rain" picture, if you apply circular mashing, get a picture of "lamb".
| | | |
| | | |
| | | |
