There are many ways how to clean the fur on its own, to save on dry cleaning. For the care of products used tools that are available, and many have houses. It is important to apply them according to the rules.
How to clean natural fur?
The care procedure can be based on mechanical and chemical principles. The first group of methods is based on removing various lumps of dirt and hair nodules by combing. Still here carry application of abrasive agents, for example, starch, manki, talcum and so on. Describing how to clean fur, it is worth paying attention to chemical cleaning technologies, based on the use of substances that can dissolve different types of contaminants. The selected tools perform several tasks:
- dissolution of fat spots and other types of pollution;
- restoration of gloss and silky pile;
- increase the elasticity of the skin base and so on.
How to clean fur fur at home?
There are many popular ways of removing dirt and giving freshness to a fur product. To understand how to clean fur at home, it is important to consider what the fur coat is made from:
- Arctic fox. Connect 3 teaspoons of salt, 1 teaspoon of ammonia and 500 ml of water. Stir well and moisten the natural matter in the solution. Process the problem areas, moving in the direction of growth of the coat.
- Mink. To return the attractive form to the fur, add 10 g of soap and 12 drops of ammonia per liter of boiling water, and also fish or pork fat in small amounts. The solution should cool to 35 ° C, and after it can be applied using a brush.
- Rabbit. Want to know how to clean the fur of this animal, then first you need to comb the nap. After make a solution of 5% peroxide or 6% vinegar and treat it with stains. Move in the direction of hair growth. At the end, walk through a damp sponge.
- Astrakhan. If yellowness appeared on the gray fur, it should be wiped with a solution prepared from 200 ml of water, 1 teaspoon of peroxide and 5 drops of ammonia.
- Otter and beaver. The fur coat should be spread out on a sheet on a table or floor and sprinkled with hot sand. Rub it all with your hand and shake it off. Repeat the procedure until the desired result is obtained.
How to clean fur on shoes?
Very nice looks shoes with fur, which not only warms, but also serves as an ornament. There are several effective ways to clean fur at home:
- For dark fur, you can use fine sawdust. This is an excellent method for shoes, in which the stains are on the seams or lapels. Sawdust needs to be poured onto the soiling and properly pressed, leaving for a couple of hours. After brush combing.
- If you want to know how to clean white fur on shoes, then pay attention to this method, which implies the use of soda. It is recommended to rub it into problem areas before the powder becomes dark, which will indicate that it has absorbed the contamination. Shake your shoes several times to remove the remaining soda. You can do combing.
How to clean fur on sheepskin coat?
For the production of natural sheepskin, goat, sheep and scribe fur are used. They can be easily cleaned in many ways. You can use absorbents, for example, starch, mango, sand, as will be discussed below. There are other ways to clean natural fur at home:
- Mix in equal amounts lemon juice or table vinegar and water. Using a sponge or a soft natural cloth, treat the fur. Note that the nap needs to be wiped and not wet.
- Finding out how you can clean the fur, you can offer a popular way in the people to return the shine to the product. Take walnuts, chop them and wrap them in cheesecloth. Just wipe it with fur. Due to the fact that there is butter in the nuts, the nap will refresh and become attractive.
How to clean fur on a down jacket?
To decorate the down jacket is often used fur collar, but still fur can be on the hands and other parts of the jacket. If interested, how to clean natural fur, then use these techniques:
- For a moist method, you need to prepare warm water and a brush for suede. Moisten it in a liquid and clean the product, moving on the growth of the pile. After this, brush and dry away from the heating devices.
- There is another way, as it is easy to clean the fur, using a dry remedy, for example, talc. Take a handful of powder and treat them with problem areas, gently rubbing your fingers so that it absorbs the dirt. Shake off the residue and repeat the procedure. It is important that eventually the color of talc is not changed. In the end, shake the product well and if the grains are left, use a vacuum cleaner.
How to clean yellowed fur?
White fur after a while can get yellowed shade, as pigmentation occurs due to the effects of heat and sun. It is necessary to understand that it is not possible to completely cope with the problem, but you can improve the appearance. There are a couple of ways how to brush white fur off yellowness:
- Mix the water, alcohol and vinegar in different amounts. Finished solution, using a brush or foam sponge. After that, wipe everything dry with a napkin.
- You can pour the fur into starch and sprinkle with a solution of shampoo or a delicate powder. As a result, you get a gruel, which is better to grind your hands over all the wool. Leave everything dry, and then remove the powder mass with a brush and shake the fur well. It will remain to dry and comb the product.
How to clean fur from smell?
Over time, the fur product has an unpleasant smell, which in no case can not be cleaned using perfume, as this will only intensify the problem. There are several ways to clean fur of polar fox and other animals:
- Dissolve soap in water, moisten the brush in it and thoroughly treat the lining, but do not touch the fur. It is better to use a damp napkin on the nap.
- Prepare a 9% solution of acetic essence, sprinkle it, and then wipe the fur. After this, hang the product in fresh air for ventilation.
- Squeeze out the orange juice and dilute it with water. Pour the solution into a jar with a sprayer and spray it on the fur.
- To clean a dark fur coat and to remove from it an unpleasant aroma it is possible so: Sprinkle the crushed coffee some sites of a product. Fold it, put it in a bag and leave for a day. After that, shake everything thoroughly.
How to properly clean the fur?
Experienced housewives actively share different secrets that will help to keep fur products in perfect condition. Add to your piggy bank the following tips on how to clean natural fur at home:
- In order not to damage the product by the chosen tool, it is first worth trying it on an invisible area to control the reaction.
- If the fur is stray and does not shine, then you can moisten the natural fabric in the vinegar and walk it over the surface of the product without touching the base. It is often not recommended to repeat this procedure, because because of vinegar, fur can become tough.
- In order not to become a rough ground, that is, the skin, you should periodically lubricate it with glycerin water. Why mix in equal parts glycerin and water.
- For the dry method, you can not use coniferous sawdust, because they have a resin that will spoil the fur.
- If the fur fell, then it's very simple to fix the situation, you need to rub it with alcohol, smooth it thoroughly, and then comb it by the hair growth.
- After cleaning, do not dry the product near radiators, with a hairdryer or iron, otherwise it may cause deformation. Fur must be dried on its own, for example, on the balcony.
Can I clean the fur with dry shampoo?
According to the reviews perfectly cleans the nap dry dog shampoo, which can be purchased at a pet store. The product should be sprayed on the fur, wait a few seconds to dry, and then comb. Finding out whether it is possible to dry the fur with dry shampoo, it is worth noting that experienced housewives recommend using cheap means. You can also use liquid shampoos for cleaning wool and silk. They need to be dissolved in water to form a foam. It is applied to the pile, left for a while, and then removed with a brush or a damp cloth.
How to clean the fur with starch?
It copes well with the contamination of starch, which must be applied to the front surface in large quantities. After that, using a cotton pad, gently rub the powder, collecting all the dirt. It will only be good to shake the fur and you can repeat the procedure several times while the starch will change in color. In the end, it will remain to comb the nap with a brush. Determining how to clean the fur, which is heavily soiled, you should recommend this method: it is recommended to heat starch in a water bath to 70-80 ° C. Then repeat the process described above.
How to clean fur with a mango?
This tool is identical to the previous version and with its help you can clean up the dirt and give a shine to the product. If you are interested in how to clean the fur at home, then use the mango, which you need to pour the product and gently rub it. If the pile is very heavily soiled, then a bit of gasoline can be added to the manga, so that the flowability of the cereal is preserved. Ready mixture should be rubbed against the pile, but you need to remove it with a dry cloth, moving in the other direction. After this, shake and shake the product well.
How to peel fur peroxide?
Peroxide 3% is ideal for white products. It needs to be diluted with water in equal proportions, and then pour the solution into a container with an atomizer. The instructions on how to clean the natural fur peroxide, indicated that the product should be sprayed and wait for it to dry completely. After that, you need to comb everything and shake it thoroughly. If fur is only an ornament, then apply it carefully, so that peroxide does not get into other parts of the product, as it can spoil them.
How to clean artificial fur?
Modern manufacturers have learned to create artificial fur of the highest quality, which is difficult to distinguish from natural products. There are several recommendations on how to clean fur properly if it is artificial:
- Mix 0.5 liters of water and alcohol and add 10 grams of glycerin. In a solution, moisten a cloth and walk through the contamination. After this, remove the excess moisture with a dry sponge.
- You can also clean artificial fur in a typewriter, including a delicate mode. It is important not to use spin. Dry the product by hanging it on a hanger and placing it on a balcony or near an open window, but not with a hot battery or other heating appliances.
- Make a soapy solution by mixing 1 tbsp. spoon of washing powder and 1 liter of water. Apply it using a cotton ball or a loofah. Remove the foam with a cloth soaked in warm water.