Who among us would not want to turn into a magic fairy even for five minutes? But this magic is under the power of every woman, it is enough just to include imagination and ... a sewing machine! Today we will tell you how to make a fairy carnival costume with our own hands.
Preparing for the carnival!
Sewing a fairy costume is not at all difficult, because you will need to make three basic elements for it - a beautiful dress, wings and a magic wand.
- To make an adult New Year's fairy costume by ourselves, we will need a transparent blue cloth, for example, tulle or organza. In our case, the width of the fabric is 2.5 meters.
- We cut the fabric into strips with a width of 20 cm. For the first tier of the skirt we need 4 strips, and for the second - 7. For a small bottom frill, 20 strips with a width of 5 cm are needed.
- In the middle of the strip of 5 cm wide we lay a line, with which we then attach it.
- Pritachivayu narrow frill to the bottom of the second tier of the skirt. We spend the first and second tiers of the skirt.
- For the very skirt of the skirt we take an opaque cloth in the tone of chiffon and we cut out of it a strip with a width of 40 cm and a length equal to the girth of the hips. We tie the coquette to the upper tier of the skirt. We bend the upper edge inward and sew a rubber band.
- Now proceed to decorating our magic skirt. To do this, we need a taffeta width of 1.5 cm. We attach the taffeta segments to the waistband of the skirt at regular intervals. Get this picture
- In principle, you can stop at this by tying the ends of the ribbons to the bows. But we decided to give our skirt a truly magical look. Therefore, we draw on paper the pattern of the petal.
- Cut out of the satin fabric eight petals.
- We spend them in pairs.
- We turn out it is visible and we sweep it in the upper corners of the loop.
- We cut the loops.
- We fix the petals on the skirt with the help of previously attached ribbons. It turns out that such an unusual skirt.
- But what is a fairy without wings ? For them, we need a thick wire, for example, hangers for clothes. We bend the wire in the form of a wing. We will wrap the wings with nylon.
- Surplus nylon cut at the base of the wing. Carefully tie the ends of the nylon. The outline of each wing is decorated with a glass bead or large sparkles
- After that, we connect both wings together. We attach the junction of the satin ribbon. We decorate the place of connection with a tape from organza.
- From it we make straps on which the wings will be fastened to the back.
- Now it's a little thing - we find a suitable jersey, we take a magic wand (you can buy it in a store or make it yourself from improvised materials) and the New Year costume "Fairy" is ready!