Bra with your own hands

An original and unusual fixture can be made with your own hands without large financial costs. The design may seem complicated, but it's actually not the case. In addition, if you have been looking for an entertaining lesson for yourself for the evening, then you have found it - and not just one.

We make a bar with our own hands - a master class

First of all, we need to know what we may need, and stock up on the material. This - a twine or thick thread, and any color and length. You can use the remaining cuts that were ready to be thrown out. The main thing is that all this should be combined. Then - inflated balloon, hair spray , PVA, a brush, a can with paint, a base for a light bulb and a wire.

1. Since the ball is puffed on, we spray it with hairspray. And while the varnish is not dry, we begin to wind the twine or thread in different directions on the ball. Just try not to leave any voids. We need only one hole to fix the bulb. It can be built at the ball of the ball. By the way, the throughput of light will depend on the density of the adjacent filaments.
2. Next, we'll have to fix the twine with PVA glue, applying it with a wide brush. To smear it is necessary in some receptions as active "bathing" of threads will turn that they simply will eat from a sphere.
3. Once the glue dries, you can blow off the balloon. Only do it carefully, holding the air. And help the rubber peel off from the twine. After you have got the ball, if necessary, impregnate the glue and the interior of the plafond for the future sconce that you just made with your own hands. And to give the desired color will help spray paint.
4. Now we need to make fasteners for the shade. And you can make it for your sconces with your own hands, cut out of wood . For this, unnecessary remains of a wooden board will do. A more original solution is to choose a snag or a beautiful branch.
5. The braid of the wire can be made from the same twine in the technique of macrame. And fixes the same PVA. For more reliability, you can flush threads. To hold a wire with a twine can additional weaving of macrame or wire fastenings - this is how you like.
6. Connecting the same electrical structure is very simple. When it is installed, you can hang a ready-made wall lamp - a sconce made by yourself. Include and enjoy!