Mosaic is a tile in the form of small squares. For the convenience of manufacturers fasten it to the mesh base 40x40 cm. The smaller the dimensions of one element, the more detailed the panel will be. This kind of coating is often used for finishing swimming pools, baths, rounded surfaces (columns), which can not be done by using standard tiles.
Bathroom - design in tile-mosaic
Interesting is the glass tile, this mosaic for the bathroom looks more like crystal than ordinary glass. It is waterproof, the temperature difference is painless (-30 to +145 degrees), resistant to chemical attack.
Ceramic tile-mosaic for the bathroom will cost an order of magnitude more. Textures are very different: reliefs in the form of irregularities, cracks, divorce, inclusions are possible. Ceramics are often coated in a glaze. This is ideal for a swimming pool.
Original smalt production looks. Manufacturing technology is somewhat complicated. The tile is very durable. The panel will slightly change the shade depending on the nature of the lighting.
Floor tiles for the bathroom in the form of a mosaic made of natural stone will transform the room. In the assortment there are both cheap and more expensive variations. The natural pattern looks rich, the base is artificially aged or polished.
Metal mosaic - the option is very unusual. She is not afraid of heels and other injuries. The basis is stainless steel or brass. The disadvantages are high cost, fear of chemical effects and temperature changes due to the rubber substrate. The plastic mosaic is also not popular.
Tips for choosing and laying mosaic
If the bath is combined with a bathroom, it is recommended to use a ceramic tile mosaic . Tile-mosaic for the bathroom - a reasonable option. Porcelain products are often used for finishing public buildings. The main requirement for flooring is strength. From the point of view of practicality, darker colors are preferred. When it comes to walls, everything here is limited only by your wishes. If the room needs to be visually enlarged, limit it to light tones.
To lay the mosaic will require special glue. The working surface of the floor or wall must be pre-prepared: lined with cement mortar. Cutting the tiles is made by wire cutters. After marking, you can apply glue (a layer of up to 1 cm) and a cloth on the work platform. Tile should be pressed, then walk on the surface with a rubber spatula. After a couple of days, the protective film is removed using a damp sponge. The last manipulation is the filling of seams with an epoxy grout. Your bathroom looks unrivaled.
| | | |
| | | |
| | | |
