Electric tile cutting machine

Such a popular decorative material as ceramic tiles is the "resident" of every house and apartment. It, with the skill, it is quite easy to lay , but you will certainly need such a special device as a tile cutter. At definition with its purchase much depends on quality of the tile. So how to choose the right electric tile cutter - we'll figure it out in this article.

Choice of electric tile cutting machine

First of all, why electric tiles, not manual? - you ask. The answer is simple:

  1. First, this is a significant time saving . Especially if you need to do a lot of work. In addition, he does not dust the room and works quietly.
  2. Secondly, electric tiles cut more accurately and with less losses . Thirdly, the tiles will not burst from overheating, because electrical appliances are equipped with a system of water or air cooling. Thanks to this, all the cuts are straight, without chips and roughness. In addition, such a tile cutter can be cut at an angle of 45 degrees, which is important for laying the corners of the walls. They can make cutouts of any complexity, even in millimeters from the edge.

We hope you have no doubt, choose a tile cutter manual or electric. Then go to the options for choosing your electrical assistant for repair.

Note that water electric tile cutters are of two types - with the lower and upper engine arrangement. Both have their own advantages in certain circumstances. Thus, models with a lower motor are more compact, they cut a tile of any size, they can be operated in any premises. While the instruments with the top engine locations are more accurate in operation.

The main characteristics that need to be paid attention and rely on when choosing an electric tile cutting machine are the following:

In addition to these basic parameters, pay attention to some useful trivia. For example, for the possibility of spatial adjustments, the visibility of the working area, the protective coverage of scales and rulers, the detailed calibration, the presence of a laser pointer of the cutting line, the guide slots, the convenience of the control knobs, the quality of the network cable and its length, the width of the equipment, the possibilities of non- removal of the protective cover, wheels for convenient transportation of the unit, as well as handles for the same purposes.

Homemade electric tile cutting machine

There are craftsmen who, having decided to save on buying a rather expensive electric tile cutter, decide to do it themselves. As a rule, it is usually taken by an ordinary Bulgarian, since this device gives the optimum speed for cutting tiles.

If there is no Bulgarian, you'll have to do it yourself or order a gearbox for the motor. The reducer should provide achievement of 6000 revolutions per minute. But this decision is not the most correct and rational.

To make the cuts in the process of work turned out to be even, you need to attach the device to the table top, on which all the work will be performed afterwards. So it will be much more convenient for you.

Rating of electric tile cutters

The best models among electric tile cutters are the following models: