Deep Well Pump

For any private household, the issue of water supply is one of the most important. Solve it in two ways: connect to a centralized water supply network, if any, or to pierce your own well. But you will agree, it is quite labor-consuming to lift water from a well with buckets. Hence, you can not do without buying a special pump. We will talk about the advantages of deep well pumps and how to choose them right now.

Advantages of deep well pumps

As is known, pumps for lifting water from wells are of two types: surface ones that are mounted on the surface of the earth next to the well or well, and submersible, installed directly inside the well. Depth pumps are a kind of submersible pumps and are designed to lift water from a sufficiently large depth (starting from 15 meters).

The advantages of deep-well pumps for wells include their small size and light weight, the ability to work for a long time without repair, a low level of vibration that will not destructively affect the concrete walls of the well.

How to choose a deep well pump?

Today in the market you can find a huge number of different models of deep pumps for wells and wells. How in them not to get confused and buy exactly the pump that is needed? For the right choice when buying, you should pay attention to the following points:

1. You can only buy the pump, the performance of which corresponds to the passport data of the well or well: depth, diameter, etc. The same goes for the power of the pump - although a very powerful unit will pump water into the water supply much more quickly, but it will create excessive pressure in the system, which as a result will lead only to the fastest wear of the pipes.
2. If there is no passport for a well or a well, then it is necessary to focus on the pump's performance - it must cover the daily water demand by 25%. On average, each member of the family consumes about 150 liters of water a day and another 5 liters is needed to irrigate each square meter of the plot.
3. The physical dimensions of the pump must be less than the diameter of the well by at least 30 cm. This gap is needed to ensure that the pump receives the required amount of liquid for cooling.
4. The pump should not only raise a certain amount of water from the depth, but also provide the necessary pressure for the normal operation of the system. The maximum head emitted by the pump must cover the depth of the well and the distance to which the well is away from the house. In this case, it should be borne in mind that every 10 meters of horizontal pumping is reduced by a maximum head of 1 meter. Ie, if in 20 meters from the house there is a 15-meter well, you need to purchase a pump with a maximum head of 33 meters. In addition, affect the amount of pressure and installed in the system filters, each of which also reduces the maximum head by 1 meter.

Depth pump for the well "Aquarius"

Deserved popularity in the pumping equipment market deep pumps for wells "Aquarius". This is a product of a Russian manufacturer, which means that it is fully adapted for domestic use. Their advantages include a complete lack of vibration, long life, good performance and a wide range. In addition, the pumps "Aquarius" are universal - they can be used in wells, wells, and in open reservoirs.

Deep well pump for the well "Kid"

Summer residents and residents of the private sector have long appreciated the deep-water pump "Kid". Although he is small in size, he does quite well with his work. Pump "Baby" can be installed in wells, on wells, and also used for pumping water from basements and watering vegetable gardens .