When the hands are golden, and the head is constantly inventing new ideas for the home, repair from a terrible fire turns into a creative and entertaining process. Even ordinary doors are a reason to try your hand at something useful. The simplest option is how to make interior doors with your own hands, use a special mechanism for the sliding system.
Sliding wooden interior door with own hands
Finding new modern mechanisms is no longer a problem. So boldly choose a rolling mechanism, buy boards and a sheet of plywood, and then follow the instructions below.
- To begin with, we draw a sketch of the future door on a sheet of paper, and determine the dimensions.
- The basis of our door will be a sheet of plywood. Already on it we will glue the boards. Pre-cut them. The length corresponds to the sketch: some long ones run along, shorter across.
- The next stage of constructing interior doors with their own hands is the working out of the surface and its grinding. When the glue dries, you can cover the door with white paint.
- Now, according to the chosen pattern, we glue the paint tape to apply a second layer of gray paint.
- After the canvas has dried, you can proceed to the last stage of making a wooden interior door with your own hands. We fasten the hinges and hang the structure.
How to make original interior doors with your own hands?
If you can not find such a fastening system, you can always get out of the situation with the help of folk savvy. Metal pipes, furniture wheels - and everything will turn out without difficulty.
- From the boards we assemble the frame of the door, after removing the dimensions of the doorway.
- The middle part is strengthened with additional partitions. In the place where the handle will be fixed, the middle is compacted with wood.
- Now we sew up plywood sheets on both sides. Inside we lay the insulating material and manvat. You can use and construction foam to blow the space between the edges of the frame.
- After the door has been assembled, you can walk around in places of fastening with putty and wipe the surface.
- Next, we paint the finished door in the chosen color.
- Finally, the last stage of manufacturing interior doors with their own hands is the installation of a sliding self-made system. At the top we attach loops that will hold the door on the pipe.
- At the bottom, we fix the wheels so that the doors can travel from side to side.
- We put a metal pipe in the loop. You can also use the curtain for eyelets. We put on the plugs and attach the whole system to the wall.
