Instead of buying a kitchen set , you can make it yourself. As a rule, to make a stylish kitchen set yourself, you must first choose a project, calculate the size.
Then fittings and material are selected. Facades and material can be cut in a building store, then you can assemble the sets yourself.
How to make a kitchen set with your own hands?
You will need to work:
- preparation of cabinets and shelves;
- facades;
- countertop;
- rear walls of plywood;
- accessories (hinges, handles, guides);
- edge, screws, screws, shelf holders, fasteners for wall cabinets;
- tools (drill, jigsaw, level, screwdriver, level, tape measure, hexagon, perforator).
The walls on which the furniture will be fixed must be flat, the headset at right angles converges at the junction point.
Consider how to make your own kitchen corner set.
Install the model headset with a corner sink, and built-in stove.
The sawing is ordered in size and the materials are delivered.
Rounded parts of the headset are cut off, edges are glued along the edges. It can be smoothed with an iron.
The boxes are being assembled.
Assemble floor pencil cases. The order of the assembly: the necessary parts are selected, the places for fastening are marked, the panels are fastened together with self-tapping screws. If necessary, the legs and guide rails are installed, the rear plywood wall is fixed.
Similarly, hanging cabinets are assembled.
There is a rounded pencil case and a hanging closet to it.
It's time to assemble the table.
Similarly, a hinged pencil case with rounded shelves is made.
A corner hanging cup is assembled, then the remaining elements will be attached to it.
Sheds are fastened to the doors.
The boxes are fastened with facades and handles.
To the pencil cases and thumbs, the doors, fixing structures and handles are screwed.
The slab of the kitchen counter is marked and cut to size, the edges are glued to the edge.
Assembling the headset
You can start installing the headset. A cut-out is made for pipes, counters and other communications. The canisters are fastened together.
A countertop is used.
Measures and cuts a hole for future washing and plates.
The table top is installed, joints are sealed with a sealant.
Hinged cabinets are marked and hung on the wall. They can be attached to the mounting plates. First, a corner cabinet is hung, then the rest are attached to it in turn. Everything is leveled.
The refrigerator is installed in the niche, the hood is extracted and the ceiling slats are fixed to conceal the ventilation.
A sealant is installed on the sealant, and a plate is attached. All communications are connected.
Floor racks are attached, doors are installed. The final stage is the installation of plugs for fasteners and plastic skirting, which hides the gap between the wall and the surface of the table. The set is ready.
Provided that everything is assembled correctly, the durability and appearance of the furniture will justify the effort and time spent. If you make your own hands a modern kitchen set, you can save a lot, because the factory design will cost two to three times more expensive.
