Interesting and unusual design of the lath ceiling in the kitchen with your own hands will help to give this room a unique appearance, as well as highlight your good taste and non-standard approach to repair issues.
Materials for design
To make the design of the kitchen ceiling with our own hands, we will need the following materials and devices:
- Metal rails for the rack ceiling.
- Bearing tires.
- Reiki for collecting the ceiling.
- Suspension brackets
- Shears for metal.
- Screws, dowels.
- Screwdriver.
How to make a ceiling in the kitchen?
The stages of decorating the ceiling in the kitchen with racks are not numerous, but it is necessary to carry out special measurements with utmost care, in order to obtain an even surface at the end:
- We set the metal guides along the perimeter of the room. They are cut along the length of the ceiling with metal scissors. The profile is fixed on the wall with the help of angle guides and screws at a distance of at least 5 cm from the old ceiling of the room.
- Next, you need to fix the hangers, they are mounted using screws with dowels in the holes drilled with a drill in the ceiling. When installing, you need to check their position in order to keep them at the same height.
- To the suspensions we attach the supporting tires, the distance between them should not exceed 1 - 1.2 m. The tires must be level with the guides attached around the perimeter of the room.
- Reiki is released from the packaging and cut to the required length for our kitchen. We fix them in the supporting tires and snap together with each other, as well as on the guide profile.
- Then install the ceiling skirting .
